UP66/E-DX Variable Speed Electronic Dual Water Pump System 66 Litres per Minute +PCS Panel - 12/24Vdc

£1,629.10
Excl. Tax: £1,357.58

Manufacturer: Marco / SKU: 16462715


Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device. 3.5 bar 24Vdc or 2.5 bar 12/24 multi-voltage versions available.

This pump features Marco's Intelligent Brain ECU system.  The pump is able to detect the constant pressure in the plumbing system and respond accordingly when the pressure drops caused by an outlet being used.  The means that the pump can respond to demand and only ever works at the appropriate speed for any given usage.  Advantages of this system include:

  • Quieter running - pump rarely needs to run at full speed
  • Longer lasting - a more mechanically sympathetic arrangement
  • Less consumption
  • With integrated 0.3L accumulator tank
  • Intelligent programming and inclusion with digital switching systems
  • Fault finding - ECU logs error codes and allows for faster diagnostics

 

Weight 14.900000
Manufacturer Marco
Input Voltage 12 / 24Vdc
Power Consumption 20 / 15 Amps
EAN Barcode 8022278609602
Liquid Type Fresh water
Flow Rate 66 l/min
Pressure 2.5 bar
Motor Power 180W + 360W
Fuse 50 Amps
Ports (BSP) 3/4"

Marco Patented Motor Flange Technology

The innovative flange which isolates the motor housing from the pump gears is an industry first. This clever piece of product design has extended the life expectancy of the Marco pump range, removing the possibility of pump failure caused by condensation build-up in the motor housing. When the pump runs, heat is generated by the spinning motor. Cool water passing through the pump head then adds the conflicting temperature, causing condensation to build. Marco's new flange design allows this condensation to escape the motor housing.

Sealed and dry motor for extended life of the brushes and lower power consumption

Enhanced motor protection

Best performance in extreme hot and cold environments

Highly extended range of fluid temperature tolerance

Thermal and mechanical decoupling for reduced wear and extended seal life

Improved resistance to chemicals

Locked alignment of the pump head 

Product Drawing

PEEK Gears

The PEEK gears guarantee constant pressure, heavy duty cycles, lower noise levels and excellent resistance to chemicals. The pump also features a nickel plated brass body and connections, stainless steel shaft, FKM seals and NBR O-rings. The pump is built to last and perform to the highest standard.

Electronic Pressure Sensor

The PEEK gears guarantee constant pressure, heavy duty cycles, lower noise levels and excellent resistance to chemicals. The pump also features a nickel plated brass body and connections, stainless steel shaft, FKM seals and NBR O-rings. The pump is built to last and perform to the highest standard.

Constant control of pressure, voltage and electrical draw

Protection of the pump from short circuits and overvoltage

Automatic stop when no more liquid is present

Reduction in electrical interferences thanks to the gradual acceleration of the motor

Noise reduction during operation

Optimisation of electrical draw

Reduced wear of components and increased life span of the system

Operative functions signaled by LEDs

*Expansion tank can be ommitted from the circuit as the pump quickly responds to pressure change. TIMAGE reccomends the use of an expansion/accumulator tank in larger plumbing circuits or circuits with washer dryers fitted. Please consult the TIMAGE technical team with any queries: technical@timage.co.uk 

 

 

PCS Control Panel

A pair of the PCS control panels are included with the UP66/E-DX pump. Connecting to the pumps using the network cable, the panels can be used to remotely monitor the operation of the pumps and interact with them.

Remote monitoring of the pump operation and interaction with it: checking of liquid presence and reset in case of malfunction without disconnecting the device.

The “Run” LED indicates that the pump is working and alerts in case of small leaks
in the system, preventing motor damage due to prolonged operation at low speed.

Stop and Start of the pump with a simple push of a button.

Quick connection of the panel to the 3m RJ11/6 terminal cable integrated in the sensor of the pump.

The panel can be recessed in a circular hole of a 70mm diameter or externally
mounted.

The terminal block allows the user to replicate the buttons and leds of the panel
on an external circuit thus favoring a personalized management of the functions
through an external device designed by third parties.