UP1-J Bilge Pump With Rubber Impeller 28 Litres/Minute- 12Vdc
Manufacturer: Marco / SKU: 16200412
Self-priming electric water pump with self-lubricating NBR flexible impeller for prolonged service life and better performance. Nickel plated brass body with stainless steel shaft.
The UP1-J is the junior water pump in the UP1 range with size defying performance. It has been designed with all the same quality hallmarks of the Marco family of pumps but in a very compact body. The pump's impressive 28 litre per minute speed exceeds equivalent competing models on the market, it is an excellent choice as a bilge pump for smaller craft. The flexible impeller can handle an amount of solids in suspension up to a maximum size of Ø5mm, but not abrasive particles. This means that the pump will continue to perform even with debris being passed through, thus making the pump suitable for sea water use. It is recommended that an inlet filter is still used when using the pump with fluids containing impurities.
The pump provides a steady, pulse-free flow.
- 12Vdc pump
- Flexible impeller in NBR material makes it an ideal bilge pump solution
- Pulse-free steady flow
- Fresh or salt water application
- High quality construction from Italian manufacturer Marco
- Patented flange eliminates condensation build-up in motor housing and extends motor life
- Compact housing for small craft application
- Complies with ISO 8846 and ISO 8849
| Weight | 1.788000 |
|---|---|
| Manufacturer | Marco |
| Input Voltage | 12Vdc |
| Hose Connection | 25mm |
| Power Consumption | 8 Amps |
| EAN Barcode | 8022278608605 |
| Liquid Type | Fresh + salt water |
| Flow Rate | 28 l/min |
| Pressure | 1 bar |
| Motor Power | 150W |
| Fuse | 10 Amps |
| Ports (BSP) | 3/8" |
